Merging Tennessee and Montana

The fragrance of Tennessee Red Cedar has always intrigued me as hard to mistake for any other wood with the exception of Juniper Cedar that grows in Montana.  You may have come in contact with the red cedar from Tennessee, used in hope chests or as closet lining.  The distinctive aroma comes from the oil in the wood and most bugs don't like it, so it prevents them from chewing on your clothing or important belongings.

I grew up in southeastern Montana where Juniper Cesar turned the bland countryside into interesting patches of dark green and sometimes a silver tree.  They tend to grow on the walls of canyons and provided a totally different atmosphere.  I can still imagine their evergreen fragrance on a hot day.  We used the dead limbs and trees for fire wood.  They were dragged up out of the canyon and taken home to our woodpile.  As I remember it now, some good sized logs were cut into firewood lengths and split into smaller pieces.  The Juniper Cedar aroma from the split wood was very similar to the Tennessee wood.  Some of the straight pieces were saved for fence posts that would last many years in the ground. I decided it was time to get these two woods together in one of my e/p vessels.  This vessel has a plastic lining (a tonic bottle) so it can be used to hold liquids.

I made two of these vessels over plastic tonic water bottles, one the large 2 liter container and the other a smaller version.  Dimensions of each are as follows:  Large vessel 13.5" tall x 6.5" diameter,  small vessel  11" tall x 5" diameter.  The Tennessee Red Cedar wood was used in the base, central strips and rings as well as the top structure including the removable cap.  The sections of end grain pieces of small Montana Juniper Cedar limbs make up the remaining surface decoration.  In case you are wondering what e/p vessel stands for there is an earlier post that details this.  This last photo shows the relative size of these two vessels.
                                                             
















Black resin holds all the wood pieces in place.  After the surfaces were worked down and sanded smooth, an oil finish was rubbed on and when dry, paste wax was applied and buffed.